Shenzhen Jia Tai Ku Technology Co

Introduction to thread locking agent
Hypoxic adhesive, also known as anaerobic adhesive or screw fixing agent, is a single type of polymer product. It mainly solidifies in an oxygen-deficient environment and does not solidify when in contact with oxygen. In an oxygen-deficient environment, rapid solidification can form extremely high strength. This product is mainly used for screw fixing, sealing parts assembly, pipeline sealing, bearing fixing, etc. in industrial production. It can extend the mechanical life and increase operational safety. Improve the quality of product batches, etc. It has extremely strong aging resistance and can withstand temperatures of ℃ and ℃. It is an industrial adhesive with superior performance.
There are many different viscosity specifications according to different uses
Product model

Viscosity
(

Color


Loosening torque


Grinding torque


Filling gaps


Shearing strength


Fixed time


Flash point




< br/> red











℃

2. Operation methods and precautions
, first degrease and decontaminate the tooth pattern interface, make it dry, clean, and free of oil stains.
, stick the workpiece as needed According to the size of the gap between them, choose the appropriate hypoxic glue (viscosity).
Apply the hypoxic glue on the front end of the male teeth and increase or decrease the amount of glue according to the size of the pipe. Use tools to lock the male and female teeth together. Yes.
, It can be preliminarily fixed within minutes after locking. Please do not loosen the glued part during this period, otherwise it will destroy the effect of the hypoxic glue.
, It takes more than an hour for the hypoxic glue to fully cure, so the assembled It is best to use large and medium-sized workpieces after an hour, so that the effect will be better.
If you want to make the oxygen-deficient glue solidify quickly and completely, please apply a high temperature above ℃ to the bonding part.
If there is a large gap When the pipe teeth or the workpiece are not tightly sealed, please add an appropriate amount of iron oxide powder and mix evenly before applying glue.
The workpiece will not fall off easily after being fully tightened. The glued part must be heated evenly with high-temperature water vapor or Use an open flame to directly bake the glued parts evenly until the glue softens before loosening.
, This product cannot be exposed to direct sunlight and should be placed in a cool and ventilated place.
, It needs to be covered after use to prevent Contamination by metal, dust and other substances may shorten the storage period.
If this product contaminates the skin, it is advisable to wash it with soap.
This product is available in various packaging styles.